| Rust Remover |
Liquid for cleaning re-bars & steel
surface |
● Simple
application by brush
● Effective rust removal, even from areas difficult
● Contains no chloride - no chance of enhancing
corrosion
● Removes rust & corrosion from ferrous & non-ferrous
metals
● Safe to handle, use & store |
● On rebars
during repairs to reinforced concrete structures
● Maintenance of mild steel structures like interior /
exterior surface of tanks & vessels water pipe lines
shuttering plates and other corroded steel surface
● Trucks, cars & other vehicles
● Automotive, marine, farm parts & equipments
● Fence, railings & walls
● Tools, locks & rust frozen parts |
● Appearance :
Brown colour liquid
● Specific gravity : 1.20 ± 0.03
● Nature : acidic
● pH : 1.5 -2.3 |
Approx. 15-18 sqm./litre Coverage
may vary with the substrate condition & the extent of
corrosion |
500 ml & 1 litre |
| Floor
Repair Mortar |
Ready mixed
dry mortar for concrete and cementitious floors |
● Ready to
use with addition of water only
● Produces high compressive, flexural and tensile
strengths for durable repairs
● Low shrinkage, non cracking
● Low downtime
● Quick turn around, faster job
● Suitable for interior and exterior applications
● Excellent resistant to frost & deicing salts
● Suitable for repair thickness upto 50 mm thickness
● Light traffic can be allowed after 24 hours
Shelf life : 6 months |
● Industrial Concrete floors
● Parking decks
● RCC Members |
● Base
Polymer modified Cemetitious powder
● Colour : Grey
● Bulk density : 1.49 ± 0.01 kg/ltr
● Water / powder ratio : 1 : 4.5 by volume
● Application time : Approx. 45 min. at 30 C
● Application temperature : 50 C to 35 C
● Compressive strength :
2 days 20 N/mm (approx) |
Upto 1.6 sqm for 30 kg
pack at 10 mm thickness |
30 kg |
| Epoxy
Injection Grout |
Water
insensitive, 2 part epoxy based injection grout |
●
Excellent flow ability which is required for injection
grouting
● Has a good chemical resistance
● Also very good for applications into cracks and voids
of underwater structures
● Seals voids / cracks in concrete effectively
● Works in the negative side of water pressure
Shelf Life : 1 Year |
● For
repairs, rehabilitation of structural members
● To fill up cracks in roof slab, RCC walls and other
structural members
● For strengthening of RCC members in repairs |
● Pot Life
:45 minutes at 30 C
● Specific gravity : 0.01 0.02
● Comprehensive strength : 80 N / mm
at 7 days
● Tensile strength : 45 N / mm
at 7 days
● Bond Strength : : 16 N / mm
at 2 days moist cure |
Consumption varies
from case to case largely depends on the porosity in the
concrete and number of grouting holes decided at site |
1 kg to 3 kg |
| Pidicrate
AM |
Expansive
plasticizing Admixture & Grouting Aid for cemetitious
grouts |
●
Produce shrinkage compensating cement slurry
● Reduced water cement ratio of cementetious
grouts, the mix has no permeability to water and has
long term durability
● Provides good flowable grout mix so that mix
could be easily placed or injected
● Chloride and iron free hence no chance of
corrosion
● Does not affect the setting time of cement
Shelf life : 1year |
● For
injection grouting in RCC slabs, sunken slabs, RCC walls
of water tanks, swimming pools and basement for water
proofing purpose
● Duct grouting
● Rock and soil anchoring
● Pre-placed aggregates and tunnel lining
● Crack filling in structural cracks
● For structural strengthening in repairs |
Colour :
Brownish Grey Powder
Bulk Density : 0.70 - 0.80 gm cc
Shrinkage : NIL |
225 g per 50 kg cement
50 kg cement & 225 g
Pidicrete AM will give 26-34 liters yield when used with
water : cement in ration of 0.30 - 0.45 |
225 g |
| Micro
Concrete |
Flowable
Mortar for repairs to damaged reinforced concrete
members |
● Can be
pumped or poured into restricted locations
● Flowable mortar hence does not require compaction
● Gaseous expansion system compensates for
shrinkage and settlement in the plastic state
● Develops high initial and ultimate final
strengths
● Offers excellent resistance to moisture ingress
● Makes required sections highly durable
● Can be applied at 100 mm thickness at one stroke
● Contains no chloride mixture
● Rapid strength gain to facilitate early
reinstatement
Shelf life : 6 months |
● Repair
to damaged reinforced concrete elements like beams,
columns, wall etc. where access is restricted and
compaction is not possible
● For jacketing of RCC columns to increase load taking
capacity
( strengthening of a vertical member) |
● Compressive strength at 0.16 w/p
ratio
100 kg / cm at 1 day
300 kg / cm at 3 days
400 kg / cm at 7 days
500 kg / cm at 28 days
● Flexural strength :
50 kg / cm at 28 days
● % water absorption after 24 hrs : 0.45
● chloride content : Nil
● Depth of carbonation mm : passes the accelerated
carbonation test
● 2 hours : Nil
● 4 Hours : Nil
● Coefficient of thermal expansion : 10 -12 x 10-6 /
º C
● Sp gravity : 2,208 ±
50 kg³ |
Covers 13.13 litres
per bag at 0.16 w/p ratio |
25 kg |
| Polymer
Mortar PX |
Two part
structural grade polymer for repairs |
● Develops high initial and ultimate final
strengths
● Can be applied by hand like conventional mortars
● Excellent bond to concrete substrate
● Contains no chloride admixture
● Extremely low permeability provides maximum
protection against carbon dioxide and chlorides
● offers excellent resistance to moisture ingress
● Shrinkage compensated hence do not crack
● Suitable to repair thickness up to 50 mm
Shelf Life : 6 months |
Reinstatement of spalled concrete to RCC members like
beams, columns, wall, slab etc. |
●
Compressive strength 120 kg / cm at
1 day
450 kg / cm at 28 days
● % water absorption after 24 hrs : 0.45
● chloride content : Nil
● Depth of carbonation mm : passes the accelerated
carbonation test, after 2 & 4 hours
● Yield : |
1.3 sqm per 25 kg pack
at 10 mm thickness |
25 kg part A= 24.750
kg powder in HDPE packing Part B = 250 g Polymer in a
plastic bottle |
| Epoxy Zinc
Primer |
For
cathodic protection to re-bars & steel surfaces |
●
Active zinc - rich system combats corrosion by electro
chemicals means
● Two component product easily brush or spray
applied
● Time saving - touch dry after 15 to 45 minutes
● Excellent as primer on steel surfaces for
further epoxy or polyurethane based coatings
Shelf Life : 6 Months |
●
For coating re-bars and steel surfaces |
●
Mixed pot-life 2 hours at 30 C (For 1 Ltr. Mix)
● Specific gravity - 2.10 ±
0.1
● Thickness of application - 75 microns
w.f.t.
● Fully re-coatable - 1 hour at 30
º C |
4-5 m
/ Litre / coat |
1 Litre |
| Epoxy
Bonding Agent |
2- part
solvent free epoxy based bonding agent |
● Easily
applied as a bonding agent for old to new concrete /
mortar
● Excellent adhesive strength
● Bond strength exceeds the tensile strength of concrete
● Comfortable open time to work with
● Has very low shrinkage property
Shelf life : 1year |
● As a
bonding agent for bonding old to new concrete / mortar
● To extend or repair structural concrete
● Can be used as a bonding agent of glazed brick, tiles,
steel & structural members |
●
Appearance : Grey colour viscous liquid
● Mix proportion 1:087
(Base : Hardener)
● Specific gravity : 1.01 ±
0.02
● Pot Life : 1 hour at 30
º C
● Flexural strength :
350 kg per sq.cm at 7 days
● Tensile strength : 200 kg per sq.cm at 7 days
● Shear Strength : : 200 per sq.cm
● Application Temp.: 15º
C to 35º C |
2-3 m
/ kg depending on the substrate |
1 kg & 2 kg & 9
kg |
| Repair
Mortar |
Epoxy
Mortar for RCC members & floor repairs |
● Easily
applied as a universal repair mortar in all industries
● Has excellent load bearing, abrasion resistance and
chemical resistance properties
● Can also be used for small repairs of floors
● Gives a non-slip surface
● Excellent early strength, hence floor can be used
quickly resistance and chemical resistance
Shelf Life : 1 yr. |
For repair
in chemical industry, heavy industry, ramps, loading and
unloading bays, paint shops, battery rooms, food
processing plants etc. |
● Pot Life :
45 minutes at 30º C
(For 10 kg of mixed material )
● Foot Traffic : 24 hrs after application
● Full cure & chemical resistance : 7 days
● Compressive strength : 50 N / mm at
7 days
● Flexural strength :
18 N / mm at 7 days
● Tensile strength : 8 N / mm at
7 days |
1.5 m
/ 10 kg pack at depending on the substrate |
10 kg |
| Coal Tar
Epoxy |
Coal Tar
Epoxy for concrete surfaces |
● Its low
viscocity formulation helps in easy application
● It can be used as a protective coating on structures
and can be applied by brush or spray equipment
● Good adhesion with concrete and metal surfaces
● Gives long lasting corrosion protection
● Chemical and abrasion resistance
● Excellent chemical resistance
● Self priming ability, hence primer is not required
Shelf Life : 6 months |
● As a
corrosion resistant coating for any concrete and metal
structures
● Useful for sewage works, effluent plants, dock and
harbour installations
● Suitable for tanks, foundations above ground or in
submerged conditions
● Provides protection to surfaces exposed to tidal
action |
●
Appearance : Black colour brushable liquid
● Sp. gravity mixed : 1.27 ±
0.01
● Viscocity : 2.5 Poise
● Pot Life: 4 hours at 30º
C ( For 9 kg mixed material)
● Touch Dry : 4 hours at 30º
C
● Full Cure : 7 days at 30º
C
● Relocatable : 15 hours approx
● No. of coats : 2-3
● Dry film thickness : 300 microns in 2 coats
● Mix ratio : 3:1
(Base : Hardener) |
The coverage is 3-4
sq. mtr. per kg depending on the substrate |
9 kg |
